USB 3.0Optical Fiber Repeater
FireNEX-5000H™
2-Port USB 3.0 Optical Fiber Repeater Extension System
FireNEX-5000H™ is a 2-Port USB 3.0 Optical Fiber Extender that is capable of not only repeating/extending USB 3.0 signal with 5 Gbps SuperSpeed bandwidth for up to 300 meters, but can also deliver up to 15W of bus power to a device from a maximum of 100 meters away.
The FireNEX-5000H™ utilizes a specifically designed hybrid optical fiber to transfer data and power at the same time, taking full advantage of optical fiber's light weight, EMI free, and easy cable management with power delivery feature.
FireNEX-5000H was awarded a 2016 Vision System Design Innovators Award.
Related Products
Features
- 100% Plug and Play
- USB 3.0 SuperSpeed Extension up to 300 meters
- 15W Maximum Power Delivery up to 100 meters (with Hybrid Cable)
- Maximum 5Gbps USB 3.0 Bandwidth Supported
- Multiple Devices Supported
- Compact & Light Profile
- Metal Extrusion Enclosure Body
- AIA USB3 Vision™ Compliant Locking Port
- RoHS Compliant
- FCC and CE Compliant
Specifications
FN5KH-LCLC-XXXX
Hybrid Optical Fiber Cable, XX meters
LCLC-5000-XXX
Multimode OM3 LC/LC 50/12um Optical Fiber Cable, XX meters
Helpful Links
- USB 3.0 - Breaking the Length Barrier
- How to Extend Kinect v2 (Xbox One) for Windows?
- USB 3.0 - Extending the use of Kinect™ camera
- USB 3.0 Machine Vision Solutions
FAQ
Q: What is the fiber optic cable used for connecting the FireNEX-5000H™ Local and Remote unit?
A: OM3 Multimode Fiber Optic Cable, with Duplex LC-LC Connector.
Q: Is FireNEX-5000H™ backward compatible with USB 2.0?
A: A separate USB Adapter must be used together with FireNEX-5000H™ to make it USB 2.0 backward compatible.
Q: What power supply do I need for the FireNEX-5000H™?
A: The Local Unit can only be bus powered. The Remote Unit needs to be powered by a 12V-24V, DC power adapter with 5.5mm x 2.5 mm center positive DC plug.
Q: What should I do if my devices are not recognized by the host when connected via FireNEX-5000H™?
A:
- Us a short USB 3.0 cable to connect the host directly to the device, to make sure the device can be detected via a direct connection. If not, please check with your device manufacture for help.
- Disable "USB Selective Suspend Setting" in Windows Control Panel->Power Options->Edit Power Plan->Change Advanced Power Setting
- If still not detected, power cycle both Local and Remote Unit and repeat the standard setup procedures described in the user manual to reconnect the device.
- If still not detected, disable and then enable USB 3.0 host in the device manager.
If none of the above methods fail, please contact Newnex technical support team for further assistance.
Q: What kind of USB 3.0 cables are needed to use with the FireNEX-5000H™?
A:A USB 3.0 A male to B male cable need to be used to connect the host computer to Local Unit.A USB 3.0 A male to Micro B male or B Male cable need to be used to connect the Remote Unit to your device, depend on the USB interface on your device.
Q: Is the FireNEX-5000H™ USB3 Vision Compliant?
A: Yes, all the USB Type-A and Type-B ports on FireNEX-5000H™ can be used with USB3 Vision Compliant Locking Cable.
Q: Does the FireNEX-5000H™ require any software or driver in order to work?
A: No, the FireNEX-5000H™ does not require any software or drivers to work.
Q: Where can the RoHS Certificate for FireNEX-5000H™ be found?
A: FireNEX-5000H™ Rohs Certifcation can be found in Newnex'sFireNEX Repeaters Certifcate.
Installation Setup
